Popis předmětu - AE3M38ZDS
Přehled studia |
Přehled oborů |
Všechny skupiny předmětů |
Všechny předměty |
Seznam rolí |
Vysvětlivky
Návod
| AE3M38ZDS | Analog Signal Processing and Digitalization | ||
|---|---|---|---|
| Role: | Rozsah výuky: | 2P+2L | |
| Katedra: | 13138 | Jazyk výuky: | EN |
| Garanti: | Zakončení: | Z,ZK | |
| Přednášející: | Kreditů: | 6 | |
| Cvičící: | Semestr: | Z | |
Anotace:
The course is dedicated to methods for preprocessing, digitalization and reconstruction of continuis signals. It is focused to the methods for achieving of high precision of transmission and suppression of spurious components. The laboratory exercises are divided into two parts: the first part is classical tasks; the second one is individual project of design of typically data acqusition system. The teaching is supported by the CAD system for measuring circuits.Osnovy přednášek:
| 1. | Operational amplifiers for signal conditioning, negative feedback^ | |
| 2. | Voltage, current, integration, charge, differential, instrumentation amplifiers^ | |
| 3. | Signal processing for resistive, capacitance and inductance sensors, coherent detection^ | |
| 4. | Signal processing for RTD, thermcouple and semiconductor temperature sensors^ | |
| 5. | Methods of nonlinear signal processing, signal compression and expansion^ | |
| 6. | Nonharmonic signal processing, rectifiers, RMS and peak to peak converters^ | |
| 7. | Signal filtering, analog and switching filters design and application^ | |
| 8. | Analog signals multiplexing and sampling, voltage references^ | |
| 9. | High speed signal digitalisation, sampling, quantization, flash, half flash and approximation A/D converters^ | |
| 10. | High resolution signal digitalisation, integration and delta sigma A/D converters, dithering^ | |
| 11. | Spectral analysis periodic and nonperiodic signals, windowing^ | |
| 12. | Signal reconstruction, direct digital synthesis^ | |
| 13. | Testing of digitalisators, sine wave fit test, spectral frequency test, histogram test^ | |
| 14. | Hardware design techniques of A/D systems, grounding, shielding, noise reduction |
Osnovy cvičení:
| 1. | Introduction, program Simulink^ | |
| 2. | Resistive bridge circuits^ | |
| 3. | Capacitive sensor circuits^ | |
| 4. | RTD temperature sensor circuits^ | |
| 5. | Thermocouple circuits^ | |
| 6. | Analog filters^ | |
| 7. | Integration converters^ | |
| 8. | Signal digitalization^ | |
| 9. | Signal reconstruction^ | |
| 10. | Project - data acqusition system, specification^ | |
| 11. | Project - signal conditioning circuits^ | |
| 12. | Project - sampling and digitalisation^ | |
| 13. | Project - parameters verification^ | |
| 14. | Results evolution^ |
Literatura:
| 1. | Pallas Areny, Webster: Sensor and signal conditioning. John Wiley Sons, 2001, ISBN 0-471-3323-1 | |
| 2. | Ripka, P., Tipek A. (ed.): Modern Sensors Handbook. ISTE 2007, ISBN 978-1-905209-66-8 | |
| 3. | Regtien, P.P.L.: Measurement Science for Engineers. Kogan Page Science, 2004, ISBN 1-9039-96589 |
Požadavky:
Poznámka:
| Rozsah výuky v kombinované formě studia: 14p+6l |
| http://measure.feld.cvut.cz/en/education/courses/AE0M38ZDS |
Předmět je zahrnut do těchto studijních plánů:
| Plán | Obor | Role | Dop. semestr |
| Stránka vytvořena 24.4.2024 05:50:52, semestry: Z/2024-5, Z,L/2023-4, připomínky k informační náplni zasílejte správci studijních plánů | Návrh a realizace: I. Halaška (K336), J. Novák (K336) |