Lidé
Ing. Karel Künzel, CSc.
Všechny publikace
The effect of magnetic field parameters on fibre orientation in high-performance fibre-reinforced concrete
- Autoři: Carrera, K., Ing. Karel Künzel, CSc., Konrád, P., Mára, M., Kheml, P., prof. Ing. Václav Papež, CSc., Sovják, R.
- Publikace: Mechanics of Materials. 2023, 177 ISSN 0167-6636.
- Rok: 2023
- DOI: 10.1016/j.mechmat.2022.104534
- Odkaz: https://doi.org/10.1016/j.mechmat.2022.104534
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
We aim at determining the value of minimal magnetic induction for magnetic orientation of fibres in cementitious composite in a given mixture and establish the effect of the magnetic field shape on the final mechanical properties. The magnetic orientation is a suitable method to ensure the required direction of steel ferromagnetic fibres in the composite. The strength of the magnetic field (magnetic induction) and rheology of the fresh mixture play a crucial role in the magnetic orientation. A special device generating alternating and direct magnetic fields with different magnetic inductions was built to determine the minimal magnetic induction for the given mixture. Moreover, the effects of using alternating magnetic field are explored. The used magnetic inductions are 60 mT, 80 mT, 100 mT and 120 mT. The nondestructive inductive measuring method is applied to confirm the orientation of fibres in the hardened composite. The effect of the shape of the magnetic field and magnetic induction on flexural strength is presented. Moreover, the effects of using the alternating or direct magnetic field on the microstructure are explored using a scanning electron microscope.
Applicability of magnetic field for directed orientation of steel fibres in high-performing cementitious composites
- Autoři: Carrera, K., Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc., Konrád, P., Mára, M., Fornůsek, J., Kheml, P., Sovják, R.
- Publikace: The International Journal of Computational Methods and Experimental Measurements. 2022, 10(2), 131-145. ISSN 2046-0546.
- Rok: 2022
- DOI: 10.2495/CMEM-V10-N2-131-145
- Odkaz: https://doi.org/10.2495/CMEM-V10-N2-131-145
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
This paper explores the practical possibility of using a magnetic field to orient steel fibres in a fresh concrete matrix. This process leads to preferential orientation, which increases the desired mechanical properties of the hardened material. In general, this paper focuses on the technical aspects of the orientation process and identifies key areas, such as the strength and shape of the magnetic field, velocity of the sample’s passage through the magnetic field and viscosity of the materials. A proto-type orienting apparatus was constructed with different permanent magnet systems to evaluate their performance. An ultrasound gel and a cementitious matrix were used as a medium for the fibres. Numerical simulations were created to further understand the effects of the magnetic field’s strength and shape. The final orientation of the fibres in hardened concrete was evaluated using Q factor measurements, X-ray scans and bending tests. A sufficiently strong magnetic field can be used to orient fibres in fresh concrete.
Concrete lintels reinforced with steel fibres oriented by a magnetic field
- Autoři: Carrera, K., Ing. Karel Künzel, CSc., Konrád, P., Sovják, R., prof. Ing. Václav Papež, CSc., Mára, M., Fornůsek, J., Kheml, P.
- Publikace: Acta Polytechnica. 2022, 62(5), 531-537. ISSN 1805-2363.
- Rok: 2022
- DOI: 10.14311/AP.2022.62.0531
- Odkaz: https://doi.org/10.14311/AP.2022.62.0531
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
This paper explores the possibility of applying the technique of magnetic orientation of steel fibres for manufacturing a concrete structural element of realistic dimensions, compared to small laboratory specimens. This technique could be a part of an answer to the current need for faster and automated production in the prefabrication industry. The examined specimens have dimensions of commonly used lintels in construction, 80 mm × 100 mm × 980 mm. The properties of specimens with magnetically oriented fibres are compared with same size specimens prefabricated conventionally. The orientation of fibres has been confirmed by Q-factor non-destructive testing method using a measuring coil. All specimens were tested with a four-point bending test. The specimens with oriented fibres show a significantly higher flexural strength, by 150 %, than specimens produced conventionally with the same volume of fibres.
Flexural strength of fibre reinforced concrete in relation to the angle of magnetically orientated fibres
- Autoři: Carrera, K., Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc., Sovják, R., Kheml, P., Fornůsek, J., Mára, M., Konrád, P.
- Publikace: MATEC Web of Conferences. Les Ulis Cedex A: EDP Sciences - Web of Conferences, 2022. ISSN 2261-236X.
- Rok: 2022
- DOI: 10.1051/matecconf/202236405017
- Odkaz: https://doi.org/10.1051/matecconf/202236405017
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
This paper focuses on high-performance fibre-reinforced concrete and its flexural strength concerning fibre orientation. The orientation is provided by a fully controlled special device. This device can align the fibres in fresh concrete using a magnetic field. The specimens are inserted into the device at different angles to ensure different fibre orientations concerning the longer side of the sample, which corresponds to the direction of the main tensile stresses. Specifically, angles of 0 °, 30 °, 60 ° and 90 ° are tested and compared with each other and with reference specimens that are not exposed to a magnetic field. All samples are measured by a non-destructive method. This method was developed in our previous research and is based on measuring the quality factor Q of a measuring coil using an impedance meter. The samples are inserted into a measuring coil connected to an impedance meter. Flexural strength is obtained from the results of a threepoint bending test. All samples are tested until complete failure.
Magnetic properties of steel fibres commonly used in concrete
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc., Carrera, K., Sovják, R.
- Publikace: Materials Today: Proceedings. Cambridge: Elsevier, 2022. p. 2599-2603. ISSN 2214-7853.
- Rok: 2022
- DOI: 10.1016/j.matpr.2022.04.134
- Odkaz: https://doi.org/10.1016/j.matpr.2022.04.134
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
The paper deals with measuring of magnetic properties of selected steel fibres commonly used in concrete. The results in relation to the possibility to orient fibres by magnetic field in fresh concrete are explained. The principle of the measurement setup used to obtain the magnetic parameters of the fibres is presented. The measurement setup is chosen to test fibres as they are with only the necessary mechanical shortening for fibres with shaped ends. Furthermore, the results for ten types of commonly used steel fibres from different manufacturers are presented and compared. For overview and control, the measurements on the fibres are supplemented by testing of known materials used in magnetic circuits.
Mechanical properties of high-performance concrete with steel fibres oriented by an electromagnetic field
- Autoři: Carrera, K., Ing. Karel Künzel, CSc., Konrád, P., Mára, M., Kheml, P., Fornůsek, J., prof. Ing. Václav Papež, CSc., Sovják, R.
- Publikace: Journal of Materials in Civil Engineering (ASCE). 2022, 34(9), 1-8. ISSN 0899-1561.
- Rok: 2022
- DOI: 10.1061/(ASCE)MT.1943-5533.0004342
- Odkaz: https://doi.org/10.1061/(ASCE)MT.1943-5533.0004342
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
In order to achieve better efficiency of dispersed fibre reinforcement in cementitious composites, manufacturers need to be able to directly control the fibre orientation. The magnetic orientation of fibres is an effective way to align fibres in the desired direction of the main tensile stresses and significantly improve the load-bearing capacity of the composite material. In this study, cementitious composites with different percentages of fibre reinforcement were subjected to the magnetic fibre-orienting process and their resulting mechanical parameters were examined. Also, a non-destructive method was used to evaluate the fibre orientation and volume. The flexural strengths and the capacity to dissipate mechanical energy were improved considerably compared to the reference non-oriented specimens. The non-destructive method was also reasonably accurate to predict these results.
Modeling of rotation of stiff ferromagnetic fiber in non-Newtonian fluid initiated by magnetic field
- Autoři: Carrera, K., Mikeš, K., Ing. Karel Künzel, CSc.,
- Publikace: AIP Conference Proceedings. Melville (NY): AIP Publishing LLC, 2022. p. 1-4. vol. 2425. ISBN 978-0-7354-4182-8.
- Rok: 2022
- DOI: 10.1063/5.0081479
- Odkaz: https://doi.org/10.1063/5.0081479
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
The article deals with the numerical model describing the rotation of stiff ferromagnetic fiber in non-Newtonian fluid initiated by the magnetic field. Simulations in the software ANSYS ® were performed to determine the magnetic force applied to a stiff ferromagnetic fiber. Function expressing moment effects of the magnetic field on the stiff ferromagnetic fiber was obtained by the data from simulations. The paper shows the derivation of the equation describing the rotation of stiff ferromagnetic fiber in a non-Newtonian fluid. Sets of experiments were performed and measured data were used to fit the numerical model.
Quality factor as a tool to measure concentration and orientation of ferromagnetic fibres in sample
- Autoři: Carrera, K., Sovják, R., prof. Ing. Václav Papež, CSc., Ing. Karel Künzel, CSc.,
- Publikace: Materials Today: Proceedings. Cambridge: Elsevier, 2022. p. 2624-2627. ISSN 2214-7853.
- Rok: 2022
- DOI: 10.1016/j.matpr.2022.04.605
- Odkaz: https://doi.org/10.1016/j.matpr.2022.04.605
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Fibre-reinforced concrete is a modern composite material. Steel fibres are often used as scattered reinforcement in cement composites. We can achieve anisotropic final products by orienting the fibres, i.e. higher strength in the required direction. One of the ways, how to control the orientation of ferromagnetic fibre in composites, is a non-destructive method based on mutual induction. The advantage of non-destructive testing is, among other things, the possibility of application to fresh cement mixtures. This paper presents a fast and effective non-destructive measuring method of fibres orientation degree and fibre volume in cementitious composites. Furthermore, the measurement of fibres oriented at different angles and different fibre volumes is shown.
Rheological properties of sonogel and comparison with rheological properties of high-performance concrete
- Autoři: Carrera, K., Kheml, P., Sovják, R., Ing. Karel Künzel, CSc.,
- Publikace: Materials Today: Proceedings. Lausanne: Elsevier, 2022. p. 1308-1311. ISSN 2214-7853.
- Rok: 2022
- DOI: 10.1016/j.matpr.2022.02.160
- Odkaz: https://doi.org/10.1016/j.matpr.2022.02.160
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
This paper deals with the measurement and comparison of the rheological properties of sonogel and high-performance concrete (HPC). Measurements were made with two different instruments. The Mars II rheometer was used to measure the absolute data of the sonogel. Comparative measurements of HPC and sonogel were performed with HAAKE VISCOTESTER iQ. The flow curve test and the stress growth test were performed. The thixotropy behavior of sonogel was investigated as well. The results are presented in the context of the magnetic orientation of fibers in cement composites.
Simulations of the behaviour of steel ferromagnetic fibres commonly used in concrete in a magnetic field
- Autoři: Ing. Kateřina Nováková, Carrera, K., Konrád, P., Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc., Sovják, R.
- Publikace: Materials. 2022, 15(1), 1-13. ISSN 1996-1944.
- Rok: 2022
- DOI: 10.3390/ma15010128
- Odkaz: https://doi.org/10.3390/ma15010128
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
The efficiency of fibre reinforcement in concrete can be drastically increased by orienting the fibres using a magnetic field. However, the parameters of such a field are not immediately apparent, as they depend on the specific fibre reaction to the magnetic field. In this paper, numerical simulations are conducted to study the mechanical torque acting on fibres placed in a magnetic field. The simulations are verified with an experimental setup as well as theoretical relationships. Ten different fibre types, both straight and hook-ended, are examined. The developed model can be successfully used to study the behaviour of fibres in a magnetic field. The fibre size plays the most important role together with the magnetic saturation of the fibre material. Multiple fibres show significant interactions.
Summary of findings on magnetic orientation of fibers in cement composites
- Autoři: Kheml, P., Carrera, K., Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc., Sovják, R.
- Publikace: Materials Today: Proceedings. Lausanne: Elsevier, 2022. p. 1104-1107. ISSN 2214-7853.
- Rok: 2022
- DOI: 10.1016/j.matpr.2022.01.201
- Odkaz: https://doi.org/10.1016/j.matpr.2022.01.201
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
This article summarizes the findings in newly developed technology – Magnetic Orientation of Fibers (MOF). New incoming technology MOF can easily and effectively reinforce concrete elements in a specific direction with ferromagnetic fibers using a magnetic field. Using this technology, it is possible to provide the required orientation of steel ferromagnetic fibers in a fresh mixture of High-Performance Fiber Reinforced Cementitious Composite (HPFRC) with the help of a magnetic field. This article aims to inform about the existing research that deals with this technology. It summarizes the experiments performed, the development of magnetic field generation devices and fiber alignment measurement equipment.
Electromagnetic Properties of Steel Fibres for Use in Cementitious Composites, Fibre Detection and Non-Destructive Testing
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc., Carrera, K., Konrád, P., Mára, M., Kheml, P., Sovják, R.
- Publikace: Materials. 2021, 14(9), ISSN 1996-1944.
- Rok: 2021
- DOI: 10.3390/ma14092131
- Odkaz: https://doi.org/10.3390/ma14092131
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
This paper deals with the description, measurement, and use of electromagnetic properties of ferromagnetic fibres used as dispersed fibre reinforcement in composite mixtures. Firstly, the fibres’ magnetic properties are shown, and a method of measuring the hysteresis loop of fibres is proposed. The results from the measurements are presented and a discussion of the influence of measured parameters on the fibres’ orientation in a magnetic field is performed. Furthermore, methods of non-destructive estimation, of their amount and orientation in the composite specimens, are discussed. The main experimental goal of this paper is to show the relationship between this non-destructive method’s results and the destructive flexural strength measurements. The method is sensitive enough to provide information related to fibre reinforcement.
Directed orientation of steel fibres in ultra-high-performance cementitious composite using the magnetic field
- Autoři: Lovichová, R., Takáčová, K., Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc., Mára, M., Fornůsek, J., Konrád, P., Sovják, R.
- Publikace: WIT Transactions on the Built Environment. Wessex: WIT PRESS, 2020. p. 39-49. High Performance and Optimum Design of Structures and Materials IV. vol. 196. ISSN 1746-4498. ISBN 978-1-78466-389-6.
- Rok: 2020
- DOI: 10.2495/HPSM200051
- Odkaz: https://doi.org/10.2495/HPSM200051
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Ultra-high-performance fibre-reinforced cementitious composites are one of the key industries in the field of concrete technology. Thanks to their exceptional mechanical properties and significantly improved ductility, they are widely used for various special applications such as defensive and protective structures. In composite materials, it is desirable to place the reinforcement where it is needed and in the direction, it is needed. In fibre-reinforced cementitious composites, this orientation is possible through a magnetic field. In the framework of this study, a prototype device for controlled fibre orientation in a cementitious composite was developed. Mixtures of both cementitious composite and ultrasound gel having similar rheological properties to the cementitious matrix were tested. It has been observed that is possible to control the orientation of the steel fibres and direct the fibres in the desired direction by employing an electromagnetic field.
Analysis of the Measuring Circuit for the OCVD Method
- Autoři: prof. Ing. Václav Papež, CSc., Ing. Martin Horák, Ph.D., Ing. Jiří Hájek, Ph.D., Ing. Karel Künzel, CSc.,
- Publikace: ISPS'18 Proceedings. Praha: CTU. Czech Technical University Publishing House, 2018. p. 123-131. ISBN 978-80-01-06469-6.
- Rok: 2018
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
The article describes the analysis of a possible influence of a measuring circuit on the results of the OCVD method. The influence of further junction parameters on effective carrier lifetime measurements is evaluated, which has not been currently monitored by the OCVD method. Then the influence of the exciting current generator, exciting current waveform and parasitic properties of the generator is searched. A especial emphasis is given on the impedance matching between an analysed PN junction and an evaluating part of a measuring circuit. A simulation algorithm expressing the processes both in the tested junction and measurement circuit was found. The measuring system was implemented in several variants and typical measurements were carried out. For experimentally determined parameters, the simulations, whose results showed a good compliance with the results of the experiments, were performed.
Shunt Quenching and Concept of Independent Global Shunt in Multijunction Solar Cells
- Autoři: Ventosinos, F., Klusáček, J., Ing. Tomáš Finsterle, Ph.D., Ing. Karel Künzel, CSc., Haug, F.-J., doc. Mgr. Jakub Holovský, Ph.D.,
- Publikace: IEEE Journal of Photovoltaics. 2018, 4 1005-1010. ISSN 2156-3381.
- Rok: 2018
- DOI: 10.1109/JPHOTOV.2018.2828850
- Odkaz: https://doi.org/10.1109/JPHOTOV.2018.2828850
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
We show that two-terminal multijunction cells interconnected by tunnel junctions are fairly immune to individual local shunts, thanks to the shunt quenching. Interestingly, they may still suffer from global shunts. We revise the paradigm of a multijunction cell as a simple serial connection of component cells. This paradigm remains valid only for multijunction cells with laterally conductive interlayers. Instead, a new equivalent circuit is proposed and verified by measurement and simulations. As a main approach, selective illumination is applied and the voltage is measured at the end terminals. The global shunt is seen as a shift from logarithmic to linear intensity response. The presence of tunnel junction is important for an optimum configuration of tandem structures such as metal-halide perovskite with crystalline silicon solar cell.
Aktualizace evropských právních předpisů pro technické požadavky na výrobky
- Autoři: Žáček, J., Ing. Karel Künzel, CSc.,
- Publikace: Sborník XI. koference "Energetické rušení v distribučních a průmyslových sítích". 2014. ISBN 978-80-905933-0-5.
- Rok: 2014
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Harmonizace právních předpisů členských států podle Nového právního rámce pro uvádění výrobků na trh. Novela evropské směrnice EMC z roku 2014 - nejvýznamnější změny, platnost. Další aktuální směrnice týkající se elektrotechnických výrobků, vyžadované pro Prohlášení o shodě - zařízení nízkého napětí, ekodesign, omezení nebezpečných látek. Novela příručky "Blue Guide" z roku 2014 o zavádění evropských pravidel pro výrobky.
Technické požadavky na zařízení elektrických pohonů
- Autoři: Žáček, J., Ing. Karel Künzel, CSc.,
- Publikace: XXXIII. celostátní konference o elektrických pohonech. 2013. ISBN 978-80-02-02457-6.
- Rok: 2013
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Přehled technických právních předpisů Evropské unie, vztahujících se na zařízení elektrických pohonů, a jejich požadavky. Evropské směrnice pro bezpečnost zařízení nízkého napětí, elektromagnetickou kompatibilitu, ekodesign, omezení používání nebezpečných látek a strojní zařízení. Přehled základních harmonizovaných norem a specifikací příslušných k jednotlivým směrnicím. Připravované změny v rámci tzv. Nového právního rámce, návrhy přepracovaných evropských směrnic pro zařízení elektrických pohonů.
Střední hodnota okamžitého výkonu pro řízení aktivních filtrů
- Autoři: Brejcha, M., Hájek, J., Černek, P., Pígl, J., prof. Ing. Václav Papež, CSc., Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Proceedings of the 13th International Scientific Conference EPE 2012. Brno: VUT v Brně, Fakulta elektrotechniky a komunikačních technologií, 2012. pp. 323-328. ISBN 978-80-214-4514-7.
- Rok: 2012
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Příspěvek se zabývá problematikou výpočtu střední hodnoty okamžitého výkonu v řídicích programech aktivních harmonických kondicionérů (aktivních filtrů). Obvyklé metody založené na číslicových filtrech s nekonečnou impulsní odezvou (IIR), nemusí být v určitých aplikacích optimální. Důvodem může být například jejich velká výpočetní nebo paměťová náročnost. Příspěvek popisuje případy, kdy navíc mohou být tyto číslicové filtry nestabilní a zapříčinit tak chybnou funkci řídícího programu. Jako jejich zajímavá náhrada je zde prezentována CIC struktura decimačního filtru.
EMC zařízení napájených z rozvodné sítě
- Autoři: Ing. Karel Künzel, CSc.,
- Publikace: Monitoring, měření a progresivní eleborace technologických dat v energetice. Praha: EGÚ, 2011. pp. 1-10. Cyklus E2011.
- Rok: 2011
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Příspěvek shrnuje problematiku elektromagnetické kompatibility (EMC) z hlediska zařízení připojovaných do distribuční sítě. V první časti stručně opakuje uvádění výrobků na trh a postupy prokazování shody s požadavky technických předpisů. Podrobněji se příspěvek věnuje prokazování shody v oblasti EMC. Je uveden přehled zkoušek vyžadovaných harmonizovanými normami včetně jejich stručného popisu, dále jsou uvedeny zkoušky dosud nevyžadované. Zvláštní odstavec je věnován problematice pevných instalací. Obecně platné poznatky jsou doplněny praktickými zkušenostmi z laboratorních měření EMC na katedře elektrotechnologie FEL ČVUT.
Laboratoř EMC výkonových systémů
- Autoři: Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Aktuální otázky a vybrané problémy řízení elektrizační soustavy. Praha: EGÚ, 2011. pp. 1-12.
- Rok: 2011
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Příspěvek seznamuje s laboratoří, uvádí přehled zkoušek EMC a odpovídajících norem. Jsou uvedeny zkušenosti z provozu.
Závazné požadavky na ekodesign energetických spotřebičů (1. část)
- Autoři: Žáček, J., Ing. Karel Künzel, CSc.,
- Publikace: Elektro. 2011, 21(8-9), 48-50. ISSN 1210-0889.
- Rok: 2011
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Základní hlediska ekodesignu, životní cyklus výrobku. Legislativa požadavků na ekodesign energetických spotřebičů. Povinnosti výrobců při uvádění výrobku na evropský trh.
Závazné požadavky na ekodesign energetických spotřebičů (2. část - dokončení)
- Autoři: Žáček, J., Ing. Karel Künzel, CSc.,
- Publikace: Elektro. 2011, 21(10), 80-82. ISSN 1210-0889.
- Rok: 2011
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Požadavky na ekodesign vybraných skupin energetických spotřebičů. Přehled vydaných nařízení Komise (ES).
Profesní vzdělávání v oblasti elektromagnetické kompatibility
- Autoři: Cetl, T., Ing. Jiří Hájek, Ph.D., Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc., Žáček, J.
- Publikace: Praha: Česká elektrotechnická společnost, 2010. ISBN 978-80-02-02225-1.
- Rok: 2010
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Kniha se zabývá širším pohledem na oblast EMC, který kromě "klasických" kapitol zahrnuje i legislativní a ekonomické aspekty, postupy při návrhu, realizaci a uvádění zařízení do provozu. Dále se autoři podrobně věnovali novému termínu "pevné instalace", který je zanesen v nových normách Evropské unie pro oblast EMC. Důraz na popis aktuálního legislativního stavu a dalších aspektů EMC činí tuto publikaci jedinou svého druhu u nás.
Napěťový usměrňovač na deformované síti
- Autoři: Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: XXXI. celostátní konference o elektrických pohonech. Praha: Česká elektrotechnická společnost, 2009. pp. 153-158. ISBN 978-80-02-02151-3.
- Rok: 2009
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Napěťový usměrňovač, jeden z nejrozšířenějších síťových měničů, vykazuje v některých případech překvapivé chování, které citlivě reaguje na zkreslení síťového napětí. Příspěvek popisuje a vysvětluje takové jevy a uvádí možné nežádoucí účinky. Jsou předloženy příklady naměřených výsledků jak na laboratorním stanovišti tak v reálné síti. Celkový pohled doplňuje přehled zkoušek stanovených v evropských normách EMC.
Rozvoj, spolehlivost a bezpečnost elektroenergetických systémů
- Autoři: Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Elektrotechnologie 2009. Praha: České vysoké učení technické v Praze, 2009. ISBN 978-80-01-04379-0.
- Rok: 2009
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Problematika vlivu rušení na spolehlivost a bezpečnost elektroenergetických systémů. Metody pro zvyšování spolehlivosti, bezpečnosti a kvality elektrické energie v rozvodné síti.
Výkonové zdroje sinusového napětí
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc.,
- Publikace: Sborník VIII. Konference Energetické rušení v distribučních a průmyslových sítích. Praha: ELCOM, a.s., 2008. ISBN 978-80-254-3821-3.
- Rok: 2008
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Příspěvek se zabývá praktickými otázkami laboratorních výkonových zdrojů sinusového napětí síťového (nebo jemu blízkého) kmitočtu, které přitom samy nejsou zdrojem rušivých signálů znehodnocujících vlastní měření. Především se jedná o měření v oblasti harmonických síťového kmitočtu a dále o měření rušivých signálů šířených po vedení (tedy zejména v oblasti 150 kHz - 30 MHz) a dalších citlivých a přesných měření. Článek popisuje možné způsoby realizace takových zdrojů, které doplňuje řadou praktických měření vlastností takových zdrojů. V neposlední řadě je zmíněna vhodná filtrace signálů.
Nové EMC požadavky na pevné instalace elektrických pohonů
- Autoři: Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: XXX. celostátní konference o elektrických pohonech. Praha: Česká elektrotechnická společnost, 2007. pp. 167-172. ISBN 978-80-02-01921-3.
- Rok: 2007
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Článek se zabývá novými aspekty vyplývajícími z nové směrnice EMC a příslušného nařízení vlády na takzvané pevné instalace a jejich vlivu na instalace elektrických pohonů, jako typického představitele pevných instalací. Je naznačena možná struktura plánu EMC a úloha projektantů, realizátorů a provozovatelů systémů elektrických pohonů.
Přepěťové ochrany - přehled trhu
- Autoři: Žáček, J., Ing. Karel Künzel, CSc.,
- Publikace: Automatizace. 2007, 50(7-8), 485-489. ISSN 0005-125X.
- Rok: 2007
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Přehled trhu uvádí výrobky pro zlepšení elektromagnetické kompatibility. Používají se do přístrojů, zařízení, napájecích i datových sítí pro potlačení přechodných přepětí. Slouží pro zvýšení funkční bezpečnosti a spolehlivosti provozovaných zařízení.
Problematika EMC ve vysokoškolské výuce silnoproudé elektrotechniky
- Autoři: Žáček, J., Ing. Karel Künzel, CSc.,
- Publikace: Automa. 2007, 13(1), 63-65. ISSN 1210-9592.
- Rok: 2007
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Článek seznamuje s problematikou výuky elektromagnetické kompatibility, diskutuje bezpečnost studentů i použitých přístrojů při laboratorní výuce. V článku jsou uvedeny vybrané aspekty výuky EMC na katedře elektrotechnologie FEL ČVUT.
Technological Aspects of Noise-suppressing Filter Design
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc.,
- Publikace: PIERS 2007 Prague - Proceeding of Progress In Electromagnetics Research Symposium. Cambridge, MA: The Electromagnetics Academy, 2007. pp. 102-106. ISSN 1559-9450. ISBN 978-1-934142-02-8.
- Rok: 2007
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
The noise suppression is up to date problem of power electronic devices like power sources, power converters etc. Paper deals with suppression of conducted disturbances. Main topic is the filter design and it's assembling from real devices with theirs real characteristics. Filter topology and device wiring are very important too. Paper calls attention to selected questions and proposes their solution.
Úskalí návrhu odrušovacích filtrů
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc.,
- Publikace: Automatizace. 2007, 2007(7-8), 494-496. ISSN 0005-125X.
- Rok: 2007
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Článek se zabývá různými aspekty konstrukce a připojení odrušovacích filtrů, které mohou zhoršit nebo zcela potlačit správnou funkci filtru.
Vysokofrekvenční odrušovací filtry
- Autoři: Žáček, J., Ing. Karel Künzel, CSc.,
- Publikace: Automatizace. 2007, 50(7-8), 493. ISSN 0005-125X.
- Rok: 2007
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Článek se zabývá principy a uspořádáním filtrů pro potlačení vysokofrekvenčních rušivých signálů v elektrických zařízeních i napájecích sítích. Filtry se používají pro snížení emisí i zvýšení odolnosti s cílem zlepšení elektromagnetické kompatibility a zvýšení funkční bezpečnosti a spolehlivosti provozovaných zařízení.
Design of electromagnetically compatible power electrical systems
- Autoři: Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Advanced Engineering Design AED 2006. Praha: České vysoké učení technické v Praze, 2006. ISBN 80-86059-44-8.
- Rok: 2006
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
The paper deals with problems of EMC requirements for fixed installation, the required documentation including so called EMC plan, simulations and testing. The material may serve as methodology for wide professional community.
EMC v technické praxi I: Legislativní požadavky
- Autoři: Žáček, J., Ing. Karel Künzel, CSc.,
- Publikace: Automa. 2006, 12(2), 59-62. ISSN 1210-9592.
- Rok: 2006
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Článek se zabývá významnou připravovanou změnou legislativy představovanou novou evropskou směrnicí o EMC. Uvádí důvody a proces jejího vzniku i zásadní změny, které přináší.
EMC v technické praxi II: Rušivé signály, jejich zdroje a šíření
- Autoři: Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Automa. 2006, 12(3), 102-105. ISSN 1210-9592.
- Rok: 2006
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Článek se zabývá různými zdroji elektromagnetických rušivých signálů a různými hledisky jejich klasifikace, způsoby a cestami šíření rušivých signálů.
EMC v technické praxi III: Omezování rušení v oblasti nízkých kmitočtů
- Autoři: Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Automa. 2006, 12(6), 55-58. ISSN 1210-9592.
- Rok: 2006
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Článek je zaměřen na problematiku nízkofrekvenčního rušení spočívajícím především v takzvaném síťovém rušení. Významnou otázkou je vhodná volba prostředků pro zmírňování účinků takového rušení.
EMC v technické praxi IV: Omezování rušení v oblasti vysokých kmitočtů
- Autoři: Žáček, J., Ing. Karel Künzel, CSc.,
- Publikace: Automa. 2006, 12(7), 64-67. ISSN 1210-9592.
- Rok: 2006
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Článek je zaměřen na problematiku vysokofrekvenčního rušení šířícího se elektromagnetickým polem a po vedení. Jsou uvedeny nejběžnější odrušovací prostředky, jejich základní parametry a způsoby použití.
EMC v technické praxi V: Zemnění a kabeláž pevných instalací
- Autoři: Žáček, J., Ing. Karel Künzel, CSc.,
- Publikace: Automa. 2006, 12(10), 56-58. ISSN 1210-9592.
- Rok: 2006
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Článek pojednává o problematice uzemňování a stínění kabelů, jejich umístění v prostoru a omezování rušení vznikajících v propojovacích vodičích.
EMC v technické praxi VI: Základní měřicí metody
- Autoři: Žáček, J., Ing. Karel Künzel, CSc.,
- Publikace: Automa. 2006, 12(11), 52-56. ISSN 1210-9592.
- Rok: 2006
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Článek uvádí přehled používaných i připravovaných zkoušek ověřování odolnosti a dodržení emisních mezí. Jsou uvedeny základní normy specifikující metodiku zkoušek a vybavení zkušebních pracovišť.
Měniče frekvence a softstartéry - přehled trhu
- Autoři: Ing. Karel Künzel, CSc., Žáček, J., Cetl, T.
- Publikace: Automatizace. 2006, 2006(3), 207-214. ISSN 0005-125X.
- Rok: 2006
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Článek zpracovává přehled českého trhu měničů frekvence a softstartérů. Jednotlivé výrobkové řady jsou prezentovány formou tabulky, doprovodný článek tabulku doplňuje o obecné a vysvětlující informace a současné trendy.
Nová evropská směrnice EMC
- Autoři: Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: sborník ERU 2006. Praha: ELCOM, a.s., 2006.
- Rok: 2006
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Příspěvek je věnován uplatňování evropské směrnice EMC 2004/108/ES v české legislativě. Pozornost je věnována především nově definovaným pevným instalacím, požadavkům na prokazování a dokumentování jejich shody.
Ochrana měřicí techniky před vnějším a vnitřním rušením
- Autoři: Ing. Karel Künzel, CSc.,
- Publikace: Elektrotechnologie '06. Plzeň: Západočeská univerzita v Plzni, 2006. pp. 186-189. ISBN 80-7043-476-7.
- Rok: 2006
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Článek diskutuje použití drahých a citlivých přístrojů v laboratořích na vysoké škole pro výzkumné i výukové účely. Soustředí se jak na otázku bezpečnosti obsluhy, tak na bezpečnost zařízení.
Electromagnetic Compatibility of Fixed Installations
- Autoři: Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: International Conference Pelincec 2005. Warsaw University of Technology, 2005. pp. 1-6.
- Rok: 2005
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
The paper deals with the comparison of the original and new EMC Directives of EEC. It is focused particularly on the newly prescribed requirements for fixed installations.
Požadavky na harmonické síťového proudu pohonů s měniči
- Autoři: Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: XXIX. celostátní konference o elektrických pohonech. Praha: Česká elektrotechnická společnost, 2005. pp. 56-61. ISBN 80-02-01733-1.
- Rok: 2005
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Stať se zabývá současnými i připravovanými požadavky na omezení emisí harmonických síťového proudu pohonů s měniči. Možnosti dosažení shody jsou ověřeny simulacemi.
Elektrotechnické normy ve výuce
- Autoři: Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: SYMEP 2004. Praha: CTU Publishing House, 2004. pp. 271-275. ISBN 80-01-03018-0.
- Rok: 2004
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Článek uvádí význam a uplatnění technických norem ve výuce, při zpracování semestrálních projektů a diplomových prací.
Power Engineering Education and RF Properties of Power Devices and Converters
- Autoři: prof. Ing. Václav Papež, CSc., Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: 7th International Seminar on Power Semiconductor. Praha: Ediční středisko ČVUT, 2004. pp. 213-217. ISBN 80-01-03046-6.
- Rok: 2004
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
The article deals with some problems related to application of contemporary power semiconductor devices.
Vysokofrekvenční měření v silnoproudé elektrotechnice
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc.,
- Publikace: SYMEP 2004. Praha: CTU Publishing House, 2004. pp. 138-142. ISBN 80-01-03018-0.
- Rok: 2004
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Vysokofrekvenční měření v silnoproudé elektrotechnice, parazitní parametry pasivních součástek.
Elektromagnetická kompatibilita spínaných zdrojů
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc., Žáček, J.
- Publikace: Automatizace. 2003, 46(3), 188-190. ISSN 0005-125X.
- Rok: 2003
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Článek se zabývá zabezpečováním, měřením a posuzováním elektromagnetické kompatibility spínaných zdrojů.
Elektromagnetická kompatibilita výkonových spínaných zdrojů
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc., Žáček, J.
- Publikace: COMITE 2003 - Grantové fórum. Praha: IEEE Czechoslovakia Section, 2003. pp. 11-12. ISBN 80-86582-10-8.
- Rok: 2003
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Elektromagnetická kompatibilita výkonových spínaných zdrojů, které je šířeno po vedení.
Kde začíná a kde končí silnoproudá elektrotechnika
- Autoři: prof. Ing. Václav Papež, CSc., Ing. Karel Künzel, CSc.,
- Publikace: XV. DIDMATTECH 2002. Nitra: Pedagogická fakulta UKF, 2003. pp. 196-200. ISBN 80-8050-659-0.
- Rok: 2003
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Kde začíná a kde končí silnoproudá elektrotechnika, měření vysokofrekvenčního rušení.
Laboratoř elektromagnetické kompatibility katedry elektrotechnologie FEL ČVUT
- Autoři: Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Diagnostika a řízení jakosti v elektrotechnice. Praha: Ediční středisko ČVUT, 2003. pp. 73-78. ISBN 80-01-02785-6.
- Rok: 2003
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Článek uvádí vybavení laboratoře elektromagnetické kompatibility a rozsah prováděných zkoušek podle harmonizovanýcgh norem
Measurement of SMPS RF Conducted Emissions
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc., Žáček, J.
- Publikace: EDPE 2003. Košice: Technical University of Košice, 2003. ISBN 80-89061-46-X.
- Rok: 2003
- Pracoviště: Katedra elektrotechnologie
Measurement of SMPS RF Conducted Emissions
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc., Žáček, J.
- Publikace: EDPE 2003. Košice: Technical University of Košice, 2003. pp. 29-33. ISBN 80-89061-77-X.
- Rok: 2003
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Measurement of SMPS RF line Conducted Emissions of power eletric drivers.
Multistandard Serial Communication Analyzer
- Autoři: Ing. Karel Künzel, CSc., Maršík, T.
- Publikace: Applied Electronics. Plzeň: ZČU Plzeň, 2003. pp. 133-135. ISBN 80-7082-951-6.
- Rok: 2003
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
This article describes a multistandard serial communication analyzer which was made and tested at the Department of Electrotechnology, FEE, CTU. This device can be directly used for the standards TTL, RS232, and RS485/422, and the construction enables to extend the analyzer easily by other standards. Beside observing a full duplex serial communication, this device is also able to transmit serial data. This article is focused mainly on the hardware implementation of the analyzer.
Napájecí zdroje - přehled trhu
- Autoři: Cetl, T., Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Automatizace. 2003, 46(3), 194-201. ISSN 0005-125X.
- Rok: 2003
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Článek představuje přehled trhu napájecích zdrojů především malého výkonu. Shrnuje základní parametry nabízených typů. Obsahuje přehledovou tabulku a vysvětlující doprovodný text.
Některé otázky EMC elektrických pohonů
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc.,
- Publikace: XXVIII. celostátní konference o elektrických pohonech. Praha: Česká elektrotechnická společnost, 2003. pp. 276-281. ISBN 80-02-01563-0.
- Rok: 2003
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Některé otázky EMC elektrických pohonů zaměřeno zejméjna na propojení motoru a měniče.
Problematika měřicích systémů vf rušení silových zařízení
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc.,
- Publikace: Diagnostika 03. Plzeň: ZČU FE, Odd. elektrotechnologie katedry el. strojů, 2003. pp. 47-50. ISBN 80-7082-952-4.
- Rok: 2003
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Problematika měřicích systémů vf rušení silových zařízení, výkonových měničů.
The problems of RF conducted emissions measurement
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc., Žáček, J.
- Publikace: COMITE 2003. Praha: IEEE Czechoslovakia Section, 2003. pp. 121-124. ISBN 80-86582-09-4.
- Rok: 2003
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
The problems of RF conducted emissions measurement of power inventers.
Budoucnost evropské direktivy EMC
- Autoři: Ing. Karel Künzel, CSc.,
- Publikace: Sborník ERU'2002. Brno: AV studio fy ELCOM, 2002. pp. 1-7.
- Rok: 2002
- Pracoviště: Katedra elektrotechnologie
Laboratoř elektromagnetické kompatibility a její uplatnění ve výuce oboru silnoproudá elektrotechnika
- Autoři: Žáček, J., Ing. Karel Künzel, CSc.,
- Publikace: 19. Mezinárodní symposium učitelů elektrických pohonů SYMEP 2002. Liberec: Technická univerzita, 2002. pp. 20-24. ISBN 80-7083-612-1.
- Rok: 2002
- Pracoviště: Katedra elektrotechnologie
Vliv kvality sítě na parametry energie odebírané spínanými zdroji
- Autoři: Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Elektroenergetika 2002. Praha: České vysoké učení technické v Praze, 2002. pp. 97-100. ISBN 80-01-02614-0.
- Rok: 2002
- Pracoviště: Katedra elektrotechnologie
Vysokofrekvenční parametry silových kabelů
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc.,
- Publikace: DISEE 2002 Dielektrické a izolačné systémy v elektrotechnike a energetike. Bratislava: STU v Bratislave, FEI, 2002. pp. 72-75. ISBN 80-227-1758-4.
- Rok: 2002
- Pracoviště: Katedra elektrotechnologie
Diagnostika výstupních filtrů polovodičových měničů
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc.,
- Publikace: Diagnostika '01. Plzeň: Západočeská universita, 2001. pp. 141-144. ISBN 80-7082-742-4.
- Rok: 2001
- Pracoviště: Katedra elektrotechnologie
Elektromagnetické vyzařování laboratorních přístrojů se spínanými zdroji
- Autoři: prof. Ing. Václav Papež, CSc., Ing. Karel Künzel, CSc.,
- Publikace: DIDMATTECH 2001. Krakow: Politechnika Krakowska, 2001. pp. 271-275. ISBN 83-7204-221-7.
- Rok: 2001
- Pracoviště: Katedra elektrotechnologie
Potlačení předpětí na konci dlouhého kabelu přizpůsobovacím obvodem
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc.,
- Publikace: XXVII. celostátní konference o elektrických pohonech. Praha: Česká elektrotechnická společnost, 2001. pp. 332-337. ISBN 80-02-01434-0.
- Rok: 2001
- Pracoviště: Katedra elektrotechnologie
The Overvoltage Suppression in A.C. Converter Drives
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc., Smotlacha, O., Žáček, J.
- Publikace: Proceedings of Workshop 2001. Praha: České vysoké učení technické v Praze, 2001. pp. 656-657. ISBN 80-01-02335-4.
- Rok: 2001
- Pracoviště: Katedra elektrotechnologie
EMC filtry a jejich použití
- Autoři: prof. Ing. Václav Papež, CSc., Ing. Karel Künzel, CSc.,
- Publikace: Sborník ERU'2000. Brno: AV studio fy ELCOM, 2000. pp. 1-10.
- Rok: 2000
- Pracoviště: Katedra elektrotechnologie
EMC Laboratory of Power Systems and its Application for Educational Purposes
- Autoři: Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: EPE-PEMC 2000. Košice: TU Košice, 2000. pp. 7-200-7-203. ISBN 80-88922-20-8.
- Rok: 2000
- Pracoviště: Katedra elektrotechnologie
RF Characteristics of Power Cables
- Autoři: prof. Ing. Václav Papež, CSc., Ing. Karel Künzel, CSc.,
- Publikace: EMC, York 2000. York: York EMC Services, 2000. pp. 8-13. ISBN 1-902009-02-9.
- Rok: 2000
- Pracoviště: Katedra elektrotechnologie
Spectral Measurement on the System Frequency Converter-Cable-Induction Motor
- Autoři: Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc.,
- Publikace: EPE-PEMC 2000. Košice: TU Košice, 2000. pp. 123-129. ISBN 80-88922-20-8.
- Rok: 2000
- Pracoviště: Katedra elektrotechnologie
The Education EMC Laboratory of Power Systems
- Autoři: Žáček, J., Ing. Karel Künzel, CSc.,
- Publikace: EMC, York 2000. York: York EMC Services, 2000. pp. 1-4. ISBN 1-902009-02-9.
- Rok: 2000
- Pracoviště: Katedra elektrotechnologie
Napájecí zdroje malých výkonů
- Autoři: Cetl, T., Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Automatizace. 1999, 42(3), 187-188. ISSN 0005-125X.
- Rok: 1999
- Pracoviště: Katedra elektrotechnologie
Požadavky na elektromagnetickou kompatibilitu výkonových pohonů
- Autoři: Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: XXVI. Celostátní konference o el. pohonech. Praha: Česká elektrotechnická společnost, 1999. pp. 176-179. ISBN 80-02-01292-5.
- Rok: 1999
- Pracoviště: Katedra elektrotechnologie
Přehled trhu - napájecí zdroje II
- Autoři: Cetl, T., Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Automatizace. 1999, 42(7), 509-515. ISSN 0005-125X.
- Rok: 1999
- Pracoviště: Katedra elektrotechnologie
Přehled trhu - průmyslové nabíjecí zdroje a zdroje pro elektrochemii
- Autoři: Cetl, T., Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Automatizace. 1999, 42(12), 896-900. ISSN 0005-125X.
- Rok: 1999
- Pracoviště: Katedra elektrotechnologie
Propagation of the Voltage Surge in Power Cables
- Autoři: Cetl, T., Ing. Karel Künzel, CSc., prof. Ing. Václav Papež, CSc., Žáček, J.
- Publikace: Electromagnetic Compatibility. Dresden: TU Dresden, 1999. pp. 79-82. ISBN 3-929757-25-7.
- Rok: 1999
- Pracoviště: Katedra elektrotechnologie
The Voltage Stress of Cage Induction Motor Fed from Invertor
- Autoři: Cetl, T., Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Electrical Drives and Power Electronics. Košice: TU Košice, 1999. pp. 334-337. ISBN 80-88922-06-2.
- Rok: 1999
- Pracoviště: Katedra elektrotechnologie
Fair Informatic and Foul Technology
- Autoři: Urbánek, J., Ing. Karel Künzel, CSc.,
- Publikace: Elektrotechnologie 98. Plzeň: Západočeská universita, 1998. pp. 79-81. ISBN 80-7082-433-6.
- Rok: 1998
- Pracoviště: Katedra elektrotechnologie
Harmonic Current Emission of Equipment with a Special Wave Shape
- Autoři: Cetl, T., Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Power Electronics and Motion Conference '98. Praha: České vysoké učení technické v Praze, Fakulta elektrotechnická, 1998. pp. 37-40. ISBN 80-01-01832-6.
- Rok: 1998
- Pracoviště: Katedra elektrotechnologie
Simulace a měření zařízení třídy D dle ČSN EN 61000-3-2
- Autoři: Cetl, T., Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Sborník ERU'1998. Brno: AV studio fy ELCOM, 1998. pp. 1-11.
- Rok: 1998
- Pracoviště: Katedra elektrotechnologie
Computer Techniques on Department of Electrotechnology
- Autoři: Ing. Karel Künzel, CSc.,
- Publikace: Materiály a výrobné procesy v elektrotechnike. Bratislava: STU v Bratislave, 1997. pp. 90-92. ISBN 80-227-0991-3.
- Rok: 1997
- Pracoviště: Katedra elektrotechnologie
Přehled trhu - měniče kmitočtu pro pohony s asynchronními motory
- Autoři: Cetl, T., Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Automatizace. 1997, 40(2), 92-109. ISSN 0005-125X.
- Rok: 1997
- Pracoviště: Katedra elektrotechnologie
Současné trendy vývoje měničů kmitočtů pro střídavé pohony
- Autoři: Ing. Karel Künzel, CSc., Cetl, T., Žáček, J.
- Publikace: XXV. celostátní konference o elektrických pohonech. Praha: ČSVTS, 1997. pp. 200-205. ISBN 80-02-01167-8.
- Rok: 1997
- Pracoviště: Katedra elektrotechnologie
Transistorized Rectifiers
- Autoři: Ing. Karel Künzel, CSc., Seborský, S., Žáček, J.
- Publikace: Workshop 97. Praha: České vysoké učení technické v Praze, 1997, pp. 841-842.
- Rok: 1997
- Pracoviště: Katedra elektrotechnologie
-
Anotace:
Tranzistorové usměrňovače
Control of PWM Rectifiers
- Autoři: Ing. Karel Künzel, CSc., Lettl, J., Seborský, S., Žáček, J.
- Publikace: Proceedings of Electrical Drives and Power Electronics '96. Košice: TU Košice, 1996. pp. 121-126. ISBN 80-967249-3-2.
- Rok: 1996
- Pracoviště: Katedra elektrotechnologie
Modern Tools of Production Systems Analysis Applied in Education
- Autoři: Ing. Karel Künzel, CSc., Ing. Martin Molhanec, CSc., Žáček, J.
- Publikace: Proceedings of the 19th International Spring Seminar on Electronics Technology ISSE 96. Budapest: Technical University, 1996. pp. 227-231. ISBN 963-420-505-4.
- Rok: 1996
- Pracoviště: Katedra elektrotechnologie
Přehled trhu - zdroje nepřerušovaného napájení
- Autoři: Cetl, T., Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Automatizace. 1996, 39(10), 517-540. ISSN 0005-125X.
- Rok: 1996
- Pracoviště: Katedra elektrotechnologie
PWM Methods and Their Demands on IGBT Dynamics
- Autoři: Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Proceedings of the 3rd International Seminar on Power Semiconductors ISPS 96. Praha: České vysoké učení technické v Praze, 1996. pp. 217-222.
- Rok: 1996
- Pracoviště: Katedra elektrotechnologie
PWM Rectifiers
- Autoři: Ing. Karel Künzel, CSc., Seborský, S., Žáček, J.
- Publikace: Workshop 96. Praha: České vysoké učení technické v Praze, 1996, pp. 655-656.
- Rok: 1996
- Pracoviště: Katedra elektrotechnologie
Hardware for Energy Conversion from Alternative Sources
- Autoři: Cetl, T., Klečka, M., Ing. Karel Künzel, CSc., Seborský, S., Žáček, J.
- Publikace: Workshop 95. Praha: České vysoké učení technické v Praze, 1995, pp. 525-526.
- Rok: 1995
- Pracoviště: Katedra elektrotechnologie
Regulace usměrňovače s PŠM
- Autoři: Klečka, M., Ing. Karel Künzel, CSc.,
- Publikace: Sborník XXIV. celostátní konference o elektrických pohonech. Plzeň: Dům techniky, 1995. pp. 167-172.
- Rok: 1995
- Pracoviště: Katedra elektrotechnologie
Simulink aneb jak MATLAB simuluje chování dynamických systémů
- Autoři: Ing. Karel Künzel, CSc.,
- Publikace: Elektronika. 1995, 45(11), 10-12. ISSN 0862-4607.
- Rok: 1995
- Pracoviště: Katedra elektrotechnologie
Zdroje nepřetržitého napájení - UPS
- Autoři: Cetl, T., Ing. Karel Künzel, CSc., Seborský, S., Žáček, J.
- Publikace: Elektronika. 1994, 44(4), 29-43. ISSN 0862-4607.
- Rok: 1994
- Pracoviště: Katedra elektrotechnologie
Modelling of Power Systems with Semiconductor Converters
- Autoři: Ing. Karel Künzel, CSc., Žáček, J.
- Publikace: Multimedia and Computer Tools: The Future for Engineering. Fourth Annual Conference. Praha: České vysoké učení technické v Praze, 1993, pp. 220-224.
- Rok: 1993
- Pracoviště: Katedra elektrotechnologie