Ing. Jan Rimbala

Autoři: Ing. Jan Rimbala, doc. Dr. Ing. Jan Kyncl,
Publikace: Proceedings of the 2022 22nd International Scientific Conference on Electric Power Engineering. Ostrava: Vysoká škola báňská - Technická univerzita v Ostravě, 2022. p. 37-40. ISSN 2376-5631. ISBN 978-1-6654-1057-1.
Rok: 2022

DOI: 10.1109/EPE54603.2022.9814133
Odkaz: https://doi.org/10.1109/EPE54603.2022.9814133
Pracoviště: Katedra elektroenergetiky
Anotace:
Peltier cell (hereinafter PC) has undergone technological development since it's discovery by Joan C. Peltier in 1834, and from the point of view of theoretical physics they can be considered completely explored. They are commonly used for low-power cooling (for example car refrigerators) and for temperature control (controlled electronics cooling), ie mostly in low-power applications from the point of view of the power industry. We are currently experiencing enormous pressure to save energy and use waste heat, so the question arises as to whether it would not be possible to dust off the idea of 'energy' use of PC.

Autoři: Ing. Jan Votava, doc. Dr. Ing. Jan Kyncl, doc. Ing. Zdeněk Müller, Ph.D., Ing. Lavr Vetoshkin, Ph.D., Ing. Jan Rimbala,
Publikace: 2020 21st International Scientific Conference on Electric Power Engineering (EPE). Prague: Czechoslovakia Section IEEE, 2020. ISSN 2376-5623. ISBN 978-1-7281-9479-0.
Rok: 2020

DOI: 10.1109/EPE51172.2020.9269204
Odkaz: https://doi.org/10.1109/EPE51172.2020.9269204
Pracoviště: Katedra elektroenergetiky
Anotace:
This work deals with the creation of a control model for a system with CHP units, heat pump and energy storage. By simulating such system, it can be designed and optimized for primary energy consumption and investment. The model also enables extrapolation of the monitored quantities from energy consumption over a known period of time.

Autoři: Ing. Jan Rimbala, doc. Dr. Ing. Jan Kyncl,
Publikace: 2020 21st International Scientific Conference on Electric Power Engineering (EPE). Prague: Czechoslovakia Section IEEE, 2020. ISSN 2376-5623. ISBN 978-1-7281-9479-0.
Rok: 2020

DOI: 10.1109/EPE51172.2020.9269251
Odkaz: https://doi.org/10.1109/EPE51172.2020.9269251
Pracoviště: Katedra elektroenergetiky
Anotace:
The article deals with the possibilities of reducing energy consumption for the preparation of hot water by suitable switching of the air-to-water heat pump according to the expected time course of the outdoor air temperature. Higher temperature of the medium from which we pump heat always leads to an improvement of the heating factor. The article describes an idealized model taking into account two water storage The consumed electrical energy is always evaluated at the worst possible switching time of the heat pump, at a fixed switching time and with optimal switching. The considered procedure may be suitable for buildings with high hot water consumption, such as hospitals, retirement homes, or for small industrial enterprises.

Autoři: Ing. Jan Rimbala, doc. Dr. Ing. Jan Kyncl,
Publikace: 2020 21st International Scientific Conference on Electric Power Engineering (EPE). Prague: Czechoslovakia Section IEEE, 2020. ISSN 2376-5623. ISBN 978-1-7281-9479-0.
Rok: 2020

DOI: 10.1109/EPE51172.2020.9269188
Odkaz: https://doi.org/10.1109/EPE51172.2020.9269188
Pracoviště: Katedra elektroenergetiky
Anotace:
This paper analyzes the uncertainties of measuring the heat and cooling factors of compressor and absorption heat pumps. The article analyzes the uncertainties of measurement and, in two case studies, it is shown that without the use of laboratory calibrated measuring instruments, the cooling and heating factor plowing is considerably inaccurate and is better based on manufacturer data.

Autoři: Ing. Jan Rimbala, Ing. Jan Votava, doc. Dr. Ing. Jan Kyncl,
Publikace: Proceedings of the 2019 20th International Scientific Conference on Electric Power Engineering, EPE 2019. Ostrava: Vysoká škola báňská - Technická univerzita Ostrava. Fakulta elektrotechniky a informatiky, 2019. ISSN 2376-5631. ISBN 978-1-7281-1333-3.
Rok: 2019

DOI: 10.1109/EPE.2019.8778066
Odkaz: https://doi.org/10.1109/EPE.2019.8778066
Pracoviště: Katedra elektroenergetiky
Anotace:
This paper analyzes the accuracy of the calculation of the energy needed for the heating of residential buildings by heat pumps. The reference value is the consumption obtained from the actual time course of temperature and the heat loss calculated by solving the partial differential equations. This value is compared with the results obtained using average daily and monthly temperatures and using a static wall model without heat capacity. The calculations are performed for the Carnot heat pump and for the currently used WPL18 heat pump.

Autoři: Ing. Jan Votava, doc. Dr. Ing. Jan Kyncl, doc. Ing. Zdeněk Müller, Ph.D., Ing. Lavr Vetoshkin, Ph.D., Ing. Jan Rimbala,
Publikace: Proceedings of the 2019 20th International Scientific Conference on Electric Power Engineering, EPE 2019. Ostrava: Vysoká škola báňská - Technická univerzita Ostrava. Fakulta elektrotechniky a informatiky, 2019. ISSN 2376-5631. ISBN 978-1-7281-1333-3.
Rok: 2019

DOI: 10.1109/EPE.2019.8778141
Odkaz: https://doi.org/10.1109/EPE.2019.8778141
Pracoviště: Katedra elektroenergetiky
Anotace:
This paper presents technical analysis of the usage of steam accumulator in the combined heat and power production and also in all general steam production. Created mathematical model is possible to use for evening on wanted slope of steam flow change.

Všechny publikace